D-Link DIR-615+ - Client

79D-Link DIR-615+ User Manual
Section 4 - Conguration
Client
Client mode allows you to congure your router as a client on another wireless
network. This would be useful to setup the router as a wireless repeater or
connect to a WISP.
Enable: Toggle this switch to enable your router to act as a Wi-Fi client.
Broadcast wireless
network 2.4:
Toggle these switches to enable or disable your router's wireless APs.
Connecting to
network:
Choose Select network from list or Connect to hidden network.
If you choose Select network from list, select the network you
wish to connect to and enter any necessary security information as
prompted. If you choose Connect to hidden network, enter the
Wi-Fi information below.