D-Link DIR-615+ - Page 112

108D-Link DIR-615+ User Manual
Section 4 - Conguration
Create Rule:
To create a new ltering rule for a device, click the ADD button ( +) in the Rules section, or
left-click the name of the ltering mode in the line of the device for which a rule should be
created in the Known Clients section.
MAC address: The MAC address of a device from the router's LAN.
IP address: The IP address of a device from the router's LAN.
To assign several xed IP addresses to a device with a certain MAC
address, click the ADD button, and in the line displayed, enter an IP
address. A device of your LAN can have one IPv4 address and several
IPv6 addresses.
To remove the IP address, click the Delete icon ( ) in the line of the
address.
Name: Enter a name for the rule for easier identication. Optional.
Mode: Select an operating mode of the Yandex.DNS service for this rule.
Protection o: When this value is selected, the service provides the
DNS server with no restrictions on access to unsafe web sites.
Safe: When this value is selected, the service blocks access to
malicious and fraudulent web sites.
Child: When this value is selected, the service blocks access to
malicious and fraudulent web sites and blocks access to adult content.
After specifying the needed parameters, click the SAVE button.
To edit a rule for ltering, select a relevant line of the table, in the opened window,
change the needed values and click the SAVE button.
To remove a rule for ltering, select the checkbox located to the left of the relevant rule
and click the DELETE button ( ). Also you can remove a rule in the editing window.
Click APPLY when nished.
Devices and Rules (cont)