Need help?Do you have a question about the D-Link DIR-890L and is the answer not in the manual?
General| VPN support | PPTP/L2TP/IPsec |
|---|---|
| Ethernet LAN | Yes |
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| Wi-Fi band | Tri-band (2.4 GHz / 5 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 3200 Mbit/s |
| WLAN data transfer rate (first band) | 600 Mbit/s |
| WLAN data transfer rate (second band) | 1300 Mbit/s |
| USB version | 2.0/3.2 Gen 1 (3.1 Gen 1) |
| Input current | 5 A |
| Rack mounting | No |
| Frequency band | 2.4 & 5 GHz |
| USB ports quantity | 2 |
| WLAN data transfer rates supported | 600, 1300 Mbit/s |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 4 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| DHCP client | - |
| Antennas quantity | 6 |
| Security algorithms | WPA, WPA2, WPS |
| Product type | Tabletop router |
| Product color | Red |
| Certification | IC\\r CE\\r Wi-Fi Certified\\r FCC |
| Output voltage | 12 V |
| AC input voltage | 100 - 240 V |
| Power source type | DC |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | -20 - 65 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 0 - 90 % |
Weight and Dimensions| Depth | 387 mm |
|---|---|
| Width | 247.3 mm |
| Height | 119.5 mm |
| Weight | - g |
Provides an overview of the DIR-890L router's features and capabilities.
Provides step-by-step instructions for manual router installation.
Step-by-step guide for configuring the router using the setup wizard.
Instructions for setting up the router using the QRS Mobile application.
Accessing and using the router's web interface for configuration.
Configuring the router's internet connection type and settings.
Section for configuring wireless network settings.
Configuring the router's firewall to protect against network attacks.
Updating the router's firmware for new features and security.
Connecting wireless devices to the router using the WPS button.
Solutions for accessing the router's web configuration interface.
Steps to reset the router password if forgotten.
To Next Page
