D-Link DSL-226 User Manual

52D-Link DSL-226 User Manual
Section 4 - Conguration
20/40 MHz Co-
Exist:
Enable or disable the existence of both 20 MHz and 40 MHz channel
width. Keep it enabled to achieve the maximum operability of wireless
products using dierent standards in your environment. However,
it might prevent your 802.11n devices from reaching the maximum
performance.
Short Guard
Interval :
This option is available for 11N wireless standard. This increases data
rate by lowering the guard interval to 400 ns. The default is enabled.
Channel:
Select the desired channel for your wireless network to use. The
default is Auto (recommended).
Preamble Type:
This denes the length of the CRC block for communication between
the wireless router and the devices. Ensure that all your wireless
devices use the same type. Select Enabled to set it to short and
Disabled to set it to long.
Schedule :
Use the drop-down menu to select the time schedule for which the
wireless network will be available. The schedule may be set to Always,
or you can create your own schedules in the Schedule section. Refer
to Time & Schedule on page 74 for more information.
WI-FI PROTECTED SETUP
The easiest way to connect your wireless devices to your device is with Wi-Fi
Protected Setup (WPS).
Start WPS:
Press this button to establish a connection with another WPS
compatible device. Note that the WPS only works with WPA2 security
method.
Click Save when you are done.
Advanced Settings (continued)

D-Link DSL-226 Specifications

General

Brand	D-Link
Model	DSL-226
Category	Network Router
Language	English