D-Link DSL-2700U - Page 17

The following table describes the labels in this screen.
LABEL
DESCRIPTION
VPI
Enter the VPI here. VPI can range from 0 to 255.
VCI Enter the VCI here. VCI can range from 1 to 65535.
Connection Type
Select your connection type from the dropdown list.
Cloned MAC Address
Enter the cloned MAC address
and click the button labeled Clone MAC
Address.
Your ISP should provide the above information. Click on Back to
return to the previous screen, Next to continue, or Cancel to exit
the wizard without saving.
2. Static IP Address
A static IP address connection uses the same IP each time you
connect to your ISP.
12