D-Link DSL-2700U - Page 18

The following table describes the labels in this screen.
LABEL
DESCRIPTION
VPI Enter the VPI here. VPI can range from 0 to 255.
VCI Enter the VCI here. VCI can range from 1 to 65535.
IP Address
Enter the IP address here.
Subnet Mask
Enter the Subnet Mask here.
Connection Type Select your connection type from the dropdown list.
Default Gateway Enter the ISP Gateway here.
Your ISP should provide the above information. Click on Back to
return to the previous screen, Next to continue, or Cancel to exit
the wizard without saving.
3. PPPOE / PPPOA
13