D-Link DSL-3788

32D-Link DSL-3788 User Manual
Section 4 - Conguration
Static IP
Select Static IP if your ISP provides you with a specic IP address.
WAN Settings
Connection: Select Static IP Address.
WAN Service Type: Select a service type from the list. Choose from INTERNET, TR069,
or TR069_INTERNET. This information should be provided by your
ISP. If you are conguring your connection manually and your ISP
has not specied this setting, selecting INTERNET is recommended.
Connection Type: Select Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC (IPoA),or
Routed IP VC-Mux (IPoA).
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask provided by your ISP.
Gateway Address: Enter the default gateway address provided by your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Primary DNS
Server
Enter the primary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Secondary DNS
Server
Enter the secondary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Usage: Select None or Default Route.
NAT Enable: Enable or disable Network Address Translation.
Click Save when you are done.