D-Link DSL-3788

43D-Link DSL-3788 User Manual
Section 4 - Conguration
Network
Router Settings
Router IP Address: Enter the IP address of the router for this interface. The default IP
address is 192.168.1.1.
If you change the IP address, once you click Save, you will need
to enter the new IP address in your browser to get back into the
conguration utility.
Subnet Mask: Enter the subnet mask of this interface. The default subnet mask is
255.255.255.0.
UPNP Settings
UPNP: Enable or disable UPNP.
Click Save when you are done or click Advanced Settings.
Advanced Settings
You may select one of the following DHCP mode behaviors:
Disable DHCP
Server:
Select this option to disable the DHCP server. No further conguration
is available.
This section will allow you to change the local network settings of the router
and to congure the DHCP settings. To access this page, click Network from
the Settings menu on the bar on the top of the page.