D-Link DSL-3788

56D-Link DSL-3788 User Manual
Section 4 - Conguration
Static Route
The Static Routes section allows you to dene custom routes to control how
data trac is moved around your network. To access this page, click Static
Route from the Features menu on the bar on the top of the page.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the Add Rules button. Click Save when you are done.
If you edit or create a rule, the following options will appear:
Create New Rule
Destination
Address:
Enter the destination IP address of packets that will take this route.
Destination
Subnet Mask:
Enter the destination for this route.
Gateway IP
Address:
Enter your next hop gateway to be taken if this route is used.
Interface: Specify the interface the route will transit.
Metric: The route metric is a value from 0 to 15 that indicates the cost of
using this route.
Click Apply when you are done.