D-Link DSL-3788 - Page 48

44D-Link DSL-3788 User Manual
Section 4 - Conguration
Enable DHCP
Server:
Select this option to enable the DHCP server.
DHCP Relay: Select this option to enable DHCP Relay. Use this if you have a
dedicated DHCP server on your network.
If you selected Enable DHCP, the following options are available:
DHCP IP Address
Range:
Enter the starting and ending IP addresses for the DHCP server’s IP
assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conict.
DHCP Lease Time: Select the DHCP lease time from the drop down menu.
Option60 Vendor
ID:
Enter Option60 information here. (Optional)
If you selected DHCP Relay, the following options are available:
Server IP: Enter the DHCP server IP address.
Click Save when you are done.
Network - Advanced Settings