D-Link DSL-3788 - Page 45

41D-Link DSL-3788 User Manual
Section 4 - Conguration
2.4 GHz / 5 GHz Advanced Settings
Hide SSID: The default setting is Disabled. Select Enabled if you do not want
to broadcast the SSID of your wireless network.
Note: Hiding your SSID is not a form of security alone.
WMM: Enable or disable WMM QoS for your wireless network. This can
help to improve the quality of video and voice applications for your
wireless clients.
Wi-Fi Protected
Enable:
Enabled or disable WPS functionality of this device.
Wi-Fi Protected
Status:
The current WPS functionality status is displayed.
Beacon-Interval: Set the rate at which your wireless network is advertised. The default
is 100 milliseconds.
DTIM: Specify the Delivery Trac Information Map (DTIM) message interval.
Transmitting
Power:
Select the desired wireless transmission power. The available options
are 100%, 50%, 25%, or 12.5%. The default is 100%.
Threshold for
fragmentation
(2.4 GHz only):
The fragmentation threshold, which is specied in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346
byte threshold will be fragmented before transmission. 2346 is the
default setting.
2.4 GHz 802.11
Mode:
Select the desired wireless networking standard(s) to use. The
available options are 11B Only, Mixed 11G/B or Mixed 802.11b/g/n.
Advanced Settings (continued)