D-Link DWR-933 - Configuration; Initial Connection to the Router; Connect via USB; USB Tethering Driver Installation

9D-Link DWR-933 User Manual
Section 3 - Conguration
Conguration
Initial Connection to the Router
This section will show you how to congure your new D-Link mobile router using the conguration utility that can be accessed via your web-browser.
By default, the DWR-933 comes congured to work with most 4G SIM cards. Simply connect to it via Wi-Fi or use the included USB to access the
SIM’s Internet connection. If you wish to congure the router, you will need to establish a direct connection with the router in order to access the
web-based conguration utility. For information please refer to Connect via Wi-Fi on page 10. Once you have congured your router, you will
be able to connect using the Wi-Fi settings that you specied in the conguration process. Please ensure that the router is powered on and has
sucient battery power before commencing the setup process.
Connect via USB
To connect to the router via USB, plug the provided Micro USB cable into the Micro USB port on the side of the router, and plug the other end into
an available USB port on your computer.
USB Tethering Driver Installation
When you plug the DWR-933 into your computer, any necessary drivers will immediately
install. Your version of Windows may prompt you to conrm the driver installation.