D-Link DWR-933 - Wi-Fi Client Management

34D-Link DWR-933 User Manual
Section 3 - Conguration
Wi-Fi Clients
This page shows your current client list and allows you to lter clients by host name, IP address and MAC address. This ltering option enables you to
allow or deny access to specic wireless clients. Note that the 2.4 GHz and 5 GHz radios must be congured separately, but the options are the same.
Host Name
IP Address
MAC Address
Access
A unique name for each wireless client that is connected
to your router.
The IP address of the wireless client that is connected
to your router.
The hardware address of the client’s wireless adapter.
Toggle this switch to allow or deny access to specic
clients.
Note: If you deny access to a Wi-Fi client, you will see their
MAC address in the MAC Filter on page 38. If required,
you can re-allow access to the client there.
Click Apply to save changes.
Wi-Fi 2.4/5 GHz Clients List