D-Link DWR-933 - MAC Filter Configuration

38D-Link DWR-933 User Manual
Section 3 - Conguration
MAC Filter
Toggle this switch to enable/disable the MAC lter.
Here is a list of clients’ MAC addresses that have been
denied access to your network.
ID number given to client blacklisted clients by your
router.
Check this box to delete clients from the black list.
Specify the MAC address of the computer to be
ltered.
Select the Add New button and manually enter the
MAC address of the client that you wish to deny access
to your network.
Note: You can view the current list of clients connected to
your network and their MAC addresses in Wi-Fi Clients
on page 34.
Click Apply to save changes.
MAC Filter
MAC Filter For Black
List
ID
Delete
MAC Address
Add New
This page allows you to set MAC lters (Media Access Control) which allow or deny LAN (Local Area Network) computers from accessing the network.
A MAC address is a unique ID assigned by the manufacturer for devices that connect to a network. You can either manually add a MAC address or
select the MAC address from the list of clients that are currently connected to the router. Note that the 2.4 GHz and 5 GHz radios must be congured
separately, but the options are the same.
MAC Filter Settings