D-Link DWR-933 - Date & Time Settings

50D-Link DWR-933 User Manual
Section 3 - Conguration
Click the toggle to Enable or Disable automatic
time synchronization with a Simple Network Time
Protocol (SNTP) server.
Enter an SNTP server address which will be used to
synchronize the router’s time and date.
Select your current Coordinated Universal Time
zone (UTC).
You can specify in hours how frequently the
DWR-933 will update the time from an SNTP server.
Select to Enable if your region uses Daylight Saving
Time. If you have selected Enable, enter the details
of your region’s Daylight Saving scheme below.
Click Apply to save your changes.
SNTP
Primary,
Secondary and
Tertiary SNTP
Server
Time Zone
Synchronization
Cycle
Daylight Saving
Date & Time
In this section, you can adjust the date, time, and network time synchronization settings of your router.