D-Link DWR-933 - Firewall Settings

39D-Link DWR-933 User Manual
Section 3 - Conguration
Firewall Enable
DMZ Settings
PPTP Pass Through
IPsec Pass Through
L2TP Pass Through
WAN Ping Blocking
Access from WAN
Firewall Settings
A rewall helps protect your network from external cyber attack and intrusions. This page allows you to alter your router’s rewall settings.
Clicking this toggle activates the IP Filter. For more
information see IP Filter on page 41.
Toggling the DMZ (Demilitarized Zone) will expose a
chosen computer to the outside world by completely
disabling all rewalls and routing all inbound trac
to the target IP.
Note: This feature is only recommended for advanced
users. Enabling this option will potentially expose your
computer to attacks over the Internet.
Allows clients to connect to their corporate network
or VPN using the PPTP protocol.
Allows clients to connect to their corporate network
or VPN using the IPsec protocol.
Allows clients to connect to their corporate network
or VPN using the L2TP protocol.
When enabled the DWR-933 will not
respond to pings from WAN.
Clicking this toggle allows access from WAN. This
setting may open your router to external security
threats and is not recommended for most users.
Click Apply to save changes.
Firewall