D-Link DWR-933 - DHCP Settings

36D-Link DWR-933 User Manual
Section 3 - Conguration
DHCP Settings
Here you can disable or enable your router’s DHCP Service, congure the IP address for the DWR-933, and set the range of IP addresses assigned
by the DHCP server.
DHCP Service
IP Address
Subnet
IP Range
Enable or disable the DHCP Service.
Click on the last digit to alter your router’s current IP
address.
The subnet mask that your router is using.
Click on the last digits to alter the range of IP addresses
assigned by the DHCP server.
Click Apply to save changes.
DHCP Service