D-Link DWR-933 - Connection Settings

16D-Link DWR-933 User Manual
Section 3 - Conguration
Connection Settings
APN Selection Mode
Allow Data Roaming
APN
User Name and
Password (optional)
Choose to either automatically or manually select
an APN (Access Point Name).
Select this if you want to allow data roaming.
Enter your service provider’s APN.
Enter the username and password provided by your
service provider.
Auto (PAP & CHAP)
PAP
CHAP
Detect the correct combination of authentication.
Select this if your service provider uses this protocol.
Password Authentication Protocol. Select this if your
service provider uses this protocol.
Challenge Handshake Authentication Protocol.
Select this if your service provider uses this protocol.
Click Next to move to the next section.
In this section you can congure your connection settings. Depending on your mobile operator, you may have to input additional settings before
use. If so, please contact your service provider for this information.
If you choose to manually select an APN.
APN For LTE/3G