23
D-Link ShareCenter™ DNS-320L User Manual
Section 3 - Installation
Step 16 - The Disk Information window provides the current RAID
Type. However, if this isn’t already congured, read the instructions
under the Note.
Click Next to continue.
Step 17 - The RAID Conguration window provides more detailed
Physical Disk information. Here you can analyse your Disk, Vendor,
Model number, Serial number, and Disk size. Under Select RAID
Type, there are four options to choose from. Standard, JBOD, RAID
0, and RAID 1. Selecting each one provides a brief description of
which each RAID format oers. See illustrations below and check
the Knowledge Base at the back of this manual for more RAID
descriptions. Skip this step if you have setup this system before.
By default Standard is selected.
To Next Page
Loading...
