D-Link ShareCenter DNS-320L

391
D-Link ShareCenter™ DNS-320L User Manual
Section 4 - Conguration
1. Connect a MTP USB device to the USB port on the back panel of the
device. The DNS-320L will enter backup mode if MTP Backups has
been enabled in the MTP backup settings.
2. Press the USB button to start the backup process. The white USB
LED ashes briey to display that the backup is in the process. The
ShareCenter™ will create a new folder in the destination folder
that you selected in the MTP backups settings and will copy all the
media les from the MTP USB device to this folder. At this time the
USB LED remains white until the device is disconnected.
MTP Backup Process