393
D-Link ShareCenter™ DNS-320L User Manual
Section 4 - Conguration
1. Connect a USB storage device to the USB port on the back panel
of the device. The LED will blink then become solid once it is ready
for backup, if USB Backups has been enabled in the USB backup
settings.
2. Press the USB button to start the backup process. The LED starts to
blink that the backup is in the process. The ShareCenter™ will copy
or sync all the les from the source folder to the destination folder.
Please Note: No warning message will appear to indicate that all
data on the destination folder will be deleted automatically.
USB Backup Process
To Next Page
Loading...
