D-Link xStack DGS-3426G - Configure 802.1 X Authenticator Parameter

xStack
®
DGS-3426G Layer 2 Gigabit Ethernet Managed Switch
237
Parameter Description
VLAN Name
Enter the pre-configured VLAN name to create as a Guest 802.1X VLAN.
Operation
The user has four choices in configuring the Guest 802.1X VLAN, which are:
Enabled ports – Selecting this option will enable ports listed in the Port List below, as part of the
Guest VLAN. Be sure that these ports are configured for this VLAN or users will be prompted
with an error message.
Disabled ports – Selecting this option will disable ports listed in the Port List below, as part of the
Guest VLAN. Be sure that these ports are configured for this VLAN or users will be prompted
with an error message.
Select Add or Delete to add or remove a guest VLAN.
Port List
Set the port list of ports to be enabled for the Guest 802.1X VLAN using the drop-down menus.
Click Apply to implement the guest 802.1X VLAN settings entered. Only one VLAN may be assigned as the 802.1X Guest
VLAN.