xStack
®
DGS-3426G Layer 2 Gigabit Ethernet Managed Switch
NOTE: To set the Local Enable Password, see the next section, entitled Local Enable Password.
To view this window, click Security > Access Authentication Control > Enable Method Lists, as shown below:
Figure 6 - 45 Enable Method List Settings window
To delete an Enable Method List defined by the user, click the under the Delete heading corresponding to the entry desired to
be deleted. To modify an Enable Method List, click on its hyperlinked Method List Name. To configure a Method List, click the
Add button.
Both actions will result in the same window to configure:
Figure 6 - 46 Enable Method List - Edit window
Figure 6 - 47 Enable Method List - Add window
To define an Enable Login Method List, set the following parameters and click Apply:
259
To Next Page
Loading...
