D16 Group PunchBOX - Page 11

11
www.d16.pl
DESCRIPTION OF OPERATION GENERATORS SECTION
At the boom of the Kick secon you can nd a few common parameters (available regardless of the acve generator engine):
Kick’s common parameters
• Kick Send – Decides on the part of the Kick signal to be sent to the eect cascade and directly to Master / Limiter with the eect
cascade bypassed. For the minimum value (0%) the whole signal is sent only to Master / Limiter (Eects). For the medium value (50%)
the generator output is sent in half to the eect cascade and in half to Master / Limiter. For 100% the signal is sent only to the eect
cascade.
• Velocity – A switch that decides on whether Punchbox should respond to the velocity of the incoming MIDI notes. It is a global
parameter that aects all generators including Tops, Tools and Click.
• Keytrack – A switch determining whether Kick responds to the pitch of the incoming MIDI notes.