10-18
FRONT WHEEL/FRONT FORK/STEERING
● Wrap the bottom case with a piece of cloth, and fix it to
the vise.
● Apply screw locking agent to the socket bolt thread,
and assemble the socket bolt to the fork piston.
TORQUE VALUE : 2.0kgf
·
m
·When a vise is used to hold the bottom case, do not
insert the case itself but insert the bracket.
● Apply ATF to a new oil seal.
● Assemble the oil seal to the bottom case.
● Insert the oil seal with special tools until the attachment
groove of the bottom case set ring is exposed.
TOOLS : FORK SEAL DRIVER
FORK SEAL DRIVER BODY
● Install the set ring.
● Accurately assemble the set ring to the bottom case.
● Install the dust seal.
● Fill a prescribed amount of automatic transmission
fluid(ATF) into the fork tube.
CAPACITY : 58cm
3
● Slowly press the fork tube 2-3 times to discharge air.
To Next Page
Loading...
