Safety Section
-18-
The “Survive in tipover” warning is located on the
overhead guard. It shows the proper use of the operator
restraint system.
Seat Adjustment
Move the lever, slide the seat to the desired position,
and release the lever.
Adjust the seat before operating the lift truck. After
adjusting, set the seat to make sure it is properly locked.
DO NOT adjust the seat while the truck is in motion.
WARNING
Do NOT place your hand or fingers under the
seat. Injury may occur as the seat suspension
mechanism moves up and down.
NOTICE
Before getting on the truck, adjust the level of the
suspension using the grip in the rear of the seat.
WARNING
When raising and lowering the seat backrest,
avoid placing hand or fingers in the hinge area
indicated by the circle. Injury may occur.