User's Manual
111
Modify IP interface
Configure the settings for IP address, subnet mask, default gateway, user name, and password.
Enable the Add function to add the device into the Added Device area.
Click OK to save the settings.
To modify IP address in batches, do the following:
In the Searched Device list area, select the devices that you want to modify IP address in
batches.
Click .
Modify IP interface
Enable the Batch Modify function.
Configure the settings for start IP address (the IP address is allocated in sequence), subnet
mask, default gateway, user name, and password.
Enable the Add function to add the devices into the Added Device area.
Click Apply to save the settings.