System Configurations 58
4.6.2.2 Wi-Fi
Refer to "3.5.2 Wi-Fi" for details.
4.6.2.3 Bluetooth
On the General interface, click Bluetooth tab. Step 1
The Bluetooth interface is displayed.
Click to enable Bluetooth. Step 2
Click to search nearby Bluetooth device.
Step 3
Double-click the searched device and the system will display Connecting. Step 4
After several seconds, the system will display Connected, so it is connected
successfully. See Figure 4-52.
Bluetooth Figure 4-52
4.6.2.4 Serial Port
On the General interface, click Serial tab. Step 1
The Serial interface is displayed. See Figure 4-53.