System Configurations 59
Serial Figure 4-53
Set the parameters. Refer to Table 4-10. Step 2
Table 4-10 Serial port parameter description
In case of serial port control, identify devices according to the address.
Value ranges from 0 to 255.
Baud rate ranges from 1200 to 115200. There are 8 levels available.
Select data bit, including 5, 6, 7 and 8.
Select stop bit, including 1 and 2.
Select parity, including none, odd, even, checkmark and null parity.
Click Save. Step 3
4.6.2.5 General
You can set name, date and time etc. of network keyboard.
On the Settings interface, click General tab. Step 1
The General interface is displayed. See Figure 4-54.
To Next Page
Loading...
