Figure 5-44
Please refer to the following sheet for detailed information.
Here you can select date format from the dropdown list.
There are two options: 24-H and 12-H.
The time zone of the device.
It is to set system time. It becomes valid after you set.
You can click this button to save the system time as your PC current
time.
Here you can set day night save time begin time and end time. You
can set according to the date format or according to the week format.
You can check the box to enable NTP function.
You can set the time server address.
It is to set the time server port.
It is to set the sync periods between the device and the time server.
5.9.5.2 Account
Note:
For the character in the following user name or the user group name, system max supports
6-digits. The space in the front or at the end of the string is null. The valid string includes:
character, number, and underline.
The user amount is 20 and the group amount is 8 when the device is shipped out of the
factory. The factory default setup includes two levels: user and admin. You can set the
corresponding group and then set the rights for the respective user in the specified groups.
To Next Page
Loading...
