System also supports upload multiple DVRs to one FTP server. You can create multiple folders
under this FTP.
In Figure 4-46, select FTP and then double click mouse. You can see the following interface. See
Figure 4-54.
Please highlight the icon in front of Enable to activate FTP function.
Here you can input FTP server address, port and remote directory. When remote directory is null,
system automatically create folders according to the IP, time and channel.
User name and password is the account information for you to login the FTP.
File length is upload file length. When setup is larger than the actual file length, system will upload
the whole file. When setup here is smaller than the actual file length, system only uploads the set
length and auto ignore the left section. When interval value is 0, system uploads all corresponding
files.
After completed channel and weekday setup, you can set two periods for one each channel.
Click the Test button, you can see the corresponding dialogue box to see the FTP connection is
OK or not. See Figure 4-55.
Figure 4-54
Figure 4-55
4.9.5.6 Alarm center
Interface is pre-reserved for the users to develop this function. See Figure 4-56.
To Next Page
Loading...
Need help?
General