Figure 5-13
5.6.2 Relay output
Here you can select alarm output channel, the select channel alarm mode becomes manual and
alarm is enabled. See Figure 5-14. It is corresponding to the alarm output 1 (A1) and alarm output
2 (A2) of the rear panel.
Figure 5-14
5.7 Zero-channel encoding
System allows you to preview several channels on one channel. It supports 1/4-window. See
Figure 5-15.
Please note only the product of this icon can support current function.
Figure 5-15
5.8 WAN Login
In WAN mode, after you logged in, the interface is shown as below. See Figure 5-16.
To Next Page
Loading...
