Figure 5-58
5.9.7.2 WIFI
Please note this function is for the device of WIFI module.
The WIFI interface is shown as in Figure 5-59.
Please refer to chapter 4.8.2 for detailed setup information.
Figure 5-59
Please check the box to enable WIFI function and then click the Search SSID button. Now you
can view all the wireless network information in the following list. Double click a name to connect
to it. Click Refresh button, you can view latest connection status.
Click Static setting button, you can go to WIFI setup interface. Here you can input SSID (wireless
network name) and verification type such as OPEN, WEP, WPA-PSK, and WPA2-PSK.
5.9.7.3 3G
Please refer to chapter 4.8.1 for detailed setup information.
To Next Page
Loading...
Need help?
General