User management adopts group/user modes. The user name and the group name shall be
unique. One user shall be included in only one group.
5.9.5.2.1 User name
In this interface you can add/remove user and modify user name. See Figure 5-45.
Figure 5-45
Add user: It is to add a name to group and set the user rights. See Figure 5-46.
There are three default administrator users: admin/888888 and hidden user “default”.
Hidden user “default” is for system interior use only and can not be deleted. When there is no
login user, hidden user “default” automatically login. You can set some rights such as monitor for
this user so that you can view some channel view without login.
Here you can input the user name and password and then select one group for current user.
Please note the user rights shall not exceed the group right setup.
For convenient setup, please make sure the general user has the lower rights setup than the
admin.
Figure 5-46
To Next Page
Loading...
