EasyManua.ls Logo

Dahua DH-DVR0804ME-HE - Network Setting; NTP Setup

Dahua DH-DVR0804ME-HE
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
Transfer mode: Here you can select the priority between fluency/video qualities.
LAN download: System can process the downloaded data first if you enable this function. The
download speed is 1.5X or 2.0X of the normal speed.
Important
For the IP address of IPv6 version, default gateway, preferred DNS and alternate DNS, the
input value shall be 128-digit. It shall not be left in blank.
After completing all the setups please click save button, system goes back to the previous menu.
Figure 4-46
4.9.5.1 Network Setting
Network setting interface is shown as in Figure 4-47. Please draw a circle to enable
corresponding function and then double click current item to go to setup interface.
Figure 4-47
4.9.5.2 NTP Setup
You need to install SNTP server (Such as Absolute Time Server) in your PC first. In Windows XP
OS, you can use command “net start w32time” to boot up NTP service.
NTP setup interface is shown as in Figure 4-48.

Table of Contents

Related product manuals