Local Configurations 136
Select the Snapshot check box and select the corresponding channel. Step 4
Click Apply. Step 5
5.8.1.3 Configuring Face Detection Triggered Snapshot
Select Main Menu > CAMERA > ENCODE > Snapshot. Step 1
The Snapshot interface is displayed.
In the Mode list, select Human Face, and then configure other parameters. See Figure Step 2
5-99.
Figure 5-99
Select Main Menu > FACE DETECT > PARAMETERS > Human Face. Step 3
The Human Face interface is displayed. See Figure 5-100.
To Next Page
Loading...
Need help?
General