Local Configurations 232
Figure 5-196
Configure the settings for the backup parameters. See Table 5-58. Step 2
In the Device Name list, select the device that you want to back up
the files to.
Click Format, the Format interface is displayed.
If the capacity of external storage device is less than 2TB, you
can select FAT32 or NTFS to format it.
If the capacity of external storage device is equal to or more
than 2TB, you can only select NTFS to format it.
Click Browse, the Browse interface is displayed. Select the route
where you want to search for the files.
In the Record CH list, select the channel where you want to search
for the files.
In the Type list, select the file type that you want to search.
Enter the start time and end time for the files that you want to
search.
In the File Format list, select the file format as DAV or MP4 that
you want to search.
Table 5-58
Click Search to search the files that meet the configured settings. Step 3
The searched results will display in the table.
Select the files that you want to back up. Step 4
Click Backup to back up the selected files to the configured path. Step 5
To Next Page
Loading...
Need help?
General