Local Configurations 295
5.19.7.2 Performing Online Upgrade
When the Device is connected to Internet, you can use online upgrade function to upgrade the
system.
Before using this function, you need to check whether there is any new version by auto check
or manual check.
Auto check: The Device checks if there is any new version available at intervals.
Manual check: Perform real-time check whether there is any new version available.
Ensure the correct power supply and network connection during upgrading; otherwise the
upgrading might be failed.
Select Main Menu > SYSTEM > UPGRADE. Step 1
The UPGRADE interface is displayed. See Figure 5-269.
Figure 5-269
Check whether there is any new version available. Step 2
Auto check: Enable Auto-check for updates.
Manual check: Click Manual Check.
The system starts checking the new versions. After checking is completed, the check
result is displayed.
If the "It is the latest version" text is displayed, you do not need to upgrade.
If the text indicating there is a new version, please go the step 3. See Figure 5-270.
To Next Page
Loading...
Need help?
General