User’s Manual
43
The vehicle will be no longer considered as an allow list vehicle after it exceeds the
time range.
4) Enter name of Owner of Car (vehicle owner) and select Gate Mode (barrier gate)
from No Authorize (no permission of auto opening barrier) and Authorize (auto
opening barrier) as needed.
You need to select Enable barrier control from Setup > ITC > BW List > Barrier
Control.
5) Select Continue Adding, click Save and the system will save allow list plate
number information and directly enter the adding interface of next white list plate.
You can also cancel selecting Continue Adding, and then click Save to stop
adding further vehicles.
Exporting vehicles to white list in batches:
1) Click Export and it pops up the Encrypt Config dialog box.
2) Check Open (encrypt) or Close (do not encrypt) as needed, and then click
Confirm. The export file download dialog box pops up.
3) Select the path of storing files. Click Save and export white list to local in .csv
format, which can be opened in Excel.
Importing vehicles to white list in batches:
1) Click Template to download the template, or open the .csv file you exported, fill in
the allow list data which needs to be imported according to template format, and
then save the file.
2) Click Browse… and select the path where template file exists. Click Import and
you can import the allow list data into the system in batches.
Make sure that the time format in list is in accordance with that of the Camera when
importing the allow list.
4.5.1.6.3 Block List Search
You can search and check whether some plate exist in the block list, import and export the
block list plate number and vehicle information.
Step 1 Select Setup > ITC > BW List >Black List Search.
To Next Page
Loading...
Need help?
General
