User’s Manual
73
Step 3 Enter the name of user group and configure group authority.
Group Name can only consist of number, letter, underline and hyphen, the
maximum length contains 15 characters.
Group cannot be repeated.
Step 4 Click Save.
The newly added group is displayed in the group list.
After adding group, click to modify group memo or authorities; click to
delete the added group, admin group and user group can not be deleted.
Click in the row of admin group or user group to modify group memo.
4.5.6.2.2 ONVIF User
You can add, delete, modify Onvif (Open Network Video Interface Forum) on the user
management interface.
Step 1 Select Setup > System > Account > Onvif User.
Figure 4-84 Onvif user
Step 2 Click Add User.
Figure 4-85 Add user
Step 3 Configure the parameters.
To Next Page
Loading...
Need help?
General
