User’s Manual
74
Table 4-39 User parameter description
User’s unique identification. You cannot use existing user name.
Password User’s password and confirm password.
The password can be set from 8 characters to 32 nonblank characters and
contains at least two types from upper case, lower case, number and special
characters (excluding ' " ; : &)
Follow the password security notice to set a high security level password.
The new password should be in accordance with the confirm password.
Confirm
Password
Group Name The group that users belong to. Each group has different authorities.
Step 4 Click Save.
The newly added user is displayed in the user list.
After adding user, click to modify user password, group, memo and
authorities; click to delete the added user, admin user cannot be deleted.
Click in the admin row to modify user name and email address.
4.5.6.3 Safety
4.5.6.3.1 System Service
Select the system service which needs to be enabled according to actual requirement.
Step 1 Select Setup > System > Safety > System Service.
Figure 4-86 System Service
Step 2 Select needed system service.
To Next Page
Loading...
Need help?
General
