WEB Client 95
Select Setting > Information > Log > Log.
The Remote Log interface is displayed. See Figure 5-98.
Remote Log
Select Enable and remote log function is enabled.
Refer to the setting above. Click OK to finish configuration.
5.4.7.3 Online User
It can view the information of all the online users in this interface.
Select Setting > Information > Online User, and the Online User interface is displayed, see
Figure 5-99.
Online User
Click Refresh and view the latest status.
Alarm
Click the Alarm tab and the alarm tab is displayed. See Figure 5-100.
In this interface, you can select alarm type, operation and tone, view the alarm time, type and
channel. Please refer to Table 5-40 for more details.
Alarm
To Next Page
Loading...
