WEB Client 55
Default
Click OK to finish configuration.
5.4.1.9 Volume/Code Set
In this section, you can adjust the input, output volume and speed of external voice device.
Select Setting > ITC > Volume/Code Set and the interface of Volume/Code Set is displayed.
See Figure 5-42.
Volume/Code Set
5.4.2 Camera
In this section, you can set image parameter, video and stream parameters.
5.4.2.1 Attributes
5.4.2.1.1 General
In this section, you can set parameters such as image brightness, contrast, hue, saturation and
ICR switch etc.
Select Setting > Camera > Attributes > General.
The GENERAL interface is displayed. See Figure 5-43.
To Next Page
Loading...
