Need help?Do you have a question about the Dahua ITC237-PU1B-IR and is the answer not in the manual?
General| Image Sensor | 1/2.8" CMOS |
|---|---|
| Max. Resolution | 1920 x 1080 |
| ROM | 128 MB |
| Scanning System | Progressive |
| IR On/Off Control | Auto/Manual |
| IR LEDs | 4 |
| Lens Type | Fixed |
| Lens Mount | M12 |
| Iris Control | Fixed |
| Bit Rate Control | CBR/VBR |
| BLC | Yes |
| HLC | Yes |
| WDR | 120 dB |
| Gain Control | Auto/Manual |
| Noise Reduction | 3D DNR |
| Motion Detection | Yes |
| Smart IR | Yes |
| Defog | Yes |
| Mirror | Yes |
| Privacy Masking | 4 Areas |
| Ethernet | RJ-45 (10/100Base-T) |
| Browser | IE, Chrome, Firefox, Safari |
| Protection Grade | IP67 |
| Casing Material | Metal |
| Max. Aperture | F1.6 |
| Video Compression | H.265; H.264; MJPEG |
| Smart Codec | H.265+/H.264+ |
| Resolution | 1920×1080 |
| Day/Night | Auto/Color/B/W |
| White Balance | Auto/Manual |
| Region of Interest(RoI) | Yes |
| Flip | 180° |
| Protocol | IPv4; IPv6; HTTP; HTTPS; TCP; UDP; ARP; RTP; RTSP; RTCP; SMTP; FTP; DHCP; DNS; DDNS; NTP; Multicast |
| Interoperability | ONVIF (Profile S, Profile G), CGI |
| User/Host | 20 Users |
| Edge Storage | Micro SD card (Max. 256 GB) |
| Management Software | Smart PSS; DSS; DMSS |
| Certifications | CE, FCC |
| Power Supply | 12V DC/PoE (802.3af) |
| Operating Temperature | -30°C ~ +60°C (-22°F ~ +140°F) |
| Operating Humidity | ≤95% (non-condensing) |
| Audio | 1 channel in, 1 channel out |
| S/N Ratio | ≥ 50 dB |
| Video Bit Rate | 32 Kbps–8192 Kbps |
Adherence to electrical safety codes for installation and operation.
Guidelines for safe handling during transportation and storage to prevent damage.
Procedures to follow before powering the camera and during installation connection.
Emphasizes that repairs should only be performed by qualified service personnel.
Recommendations for operating environment, temperature range, and ventilation.
Recommendation to use only manufacturer-approved accessories.
Instructions for routine cleaning and upkeep of the device.
Notes on manual reference use, design changes, and trademark ownership.
Initial access procedure for the camera via web browser, including IP address entry.
Process for subsequent logins using username and password.
Overview of main menu tabs: Live, Query, Setup, and Logout.
Controls for main stream, sub stream, protocol, and fluency settings.
Options for switching between single, large, and full-screen preview displays.
Access to snapshot, record, and zoom functions from the preview interface.
Controls for changing the layout of monitoring windows.
Search and retrieve image files by time, event type, or plate.
Access and play back recorded video, including playback controls.
Search vehicle pass records by plate, requires TF card.
Setup for Intelligent Traffic Camera features like guide, snapshot, intelligence, OSD.
Adjust camera image properties: brightness, contrast, exposure, shutter.
Configure IP address, subnet mask, gateway, ONVIF, and IP filter.
Configure alarms, abnormalities, and relay outputs for event notifications.
Define storage parameters for local, FTP, and client storage.
Manage date, time, user accounts, system upgrades, and import/export settings.
View device version, system logs, and online user status.
Select alarm types, listen to alarms, and customize alarm tone paths.
Safely log out from the web interface to end the current session.
To Next Page