Set device update period.
4.6.2 Account
4.6.2.1 Account
The account interface is shown as in Figure 4-41 Account. Here you can add and delete username,
and modify user password.
Figure 4-41 Account
Anonymous login: Enable anonymous login as input IP without username and password to log in device.
This type of account only have preview right. You may switch to other account by clicking on logout.
Add user: Add user within group and set user right.
By default there are three users: admin, 888888 and 666666. Their passwords are the same as
corresponding username. Admin and 888888 are admin account by default while 666666 is user
account which has monitor right only.
Enter add user interface, input username and password, and select its group.
Username shall not exceed right of its group.
We recommend you to set user right lower than admin right.
The add user interface is shown as in Figure 4-42 Add User.
To Next Page
Loading...
Need help?
General
