Need help?Do you have a question about the Dahua ITC215-PW4I-IRLZF27135 and is the answer not in the manual?
General| Model | ITC215-PW4I-IRLZF27135 |
|---|---|
| RAM | 1GB |
| ROM | 128 MB |
| Scanning System | Progressive |
| Lens Type | Motorized vari-focal |
| Focal Length | 2.7mm~13.5mm |
| Max. Aperture | F1.6 |
| Aperture Type | Auto |
| IR On/Off Control | Auto/Manual |
| IR LEDs | 4 |
| Stream Capability | 2 Streams |
| Bit Rate Control | CBR/VBR |
| BLC | Yes |
| HLC | Yes |
| WDR | 120dB |
| White Balance | Auto/Natural/Street Lamp/Outdoor/Manual |
| Gain Control | Auto/Manual |
| Noise Reduction | 3D DNR |
| Motion Detection | Yes |
| Region of Interest(RoI) | Yes |
| Image Rotation | 0°/90°/180°/270° |
| Mirror | Yes |
| Privacy Masking | 4 areas |
| Ethernet | RJ-45 (10/100Base-T) |
| User/Host | 20 users |
| Ingress Protection | IP67 |
| Vandal Resistance | IK10 |
| Casing Material | Metal |
| Type | Security Camera |
| Sensor Type | 1/2.8" CMOS |
| Effective Pixels | 1920(H)x1080(V) |
| Max. Resolution | 1920 × 1080 |
| Electronic Shutter Speed | 1/1 s–1/100, 000 s |
| Min. Illumination | 0.005 Lux@F1.6 |
| Close Focus Distance | 1.5m |
| IR Distance | Up to 100m |
| Video Compression | H.265/H.264/MJPEG |
| Smart Codec | H.265+/H.264+ |
| Resolution | 1080P (1920×1080) |
| Video Bit Rate | 32Kbps~8192Kbps |
| Day/Night | Auto/Color/B/W |
| Protocol | IPv4;IPv6;HTTP;HTTPS;TCP;UDP;ARP;RTP;RTSP;RTCP |
| Interoperability | ONVIF, CGI |
| Edge Storage | Micro SD card (up to 256GB) |
| Browser | Chrome, Firefox |
| Management Software | Smart PSS, DSS, DMSS |
| Certifications | FCC: 47 CFR FCC Part 15, Subpart B |
| Audio Compression | G.711a, G.711Mu, AAC |
| Video Output | 1x CVBS (BNC) |
| Power Supply | DC12V/ PoE (802.3af) |
| Operating Temperature | -30°C~+60°C |
| Operating Humidity | ≤95% |
Lists essential security actions to protect the system from unauthorized access and data breaches.
Introduces the Quick Config Tool for device setup, including IP modification.
Details the steps for initializing devices, including IP and password setup.
Guides on logging directly into the WEB interface after device initialization.
Explains how to reset the admin password if forgotten.
Guides on using the WEB client's 'Guide' tab for initial configuration.
Guides on configuring recognition areas and snap lines for ANPR.
Covers ITC parameters, camera attributes, image, video, and stream settings.
Configures intelligent recognition, OSD settings for video and pictures.
Configuration for device IP address, DNS server, connection, and ONVIF settings.
Manages alarm settings and abnormality handling for device events.
Details the process of importing and upgrading device firmware.
To Next Page