WEB Client 28
Recognition
Configure recognition area.
The config example on the right of video interface can be used as a reference.
1) Click Iden Area.
Click and draw 4 lines on the video interface and the recognition area is formed.
2) Click Snap Line.
Draw snap line via dragging mouse on the area. The snap line must cross the
area.
3) Click Save to complete the settings.
Click Finish, exit guide interface and enter Live interface.
Live
Click Live tab. The system will display live interface. On this interface it can realize several
functions such as live video, live picture, realtime capture, record and config (LPR) etc.
Live
Table 5-1 Live interface bar
To Next Page
Loading...
Need help?
General
