Basic Configuration12
Device initialization (2)
Sets parameters of device initialization. Please refer to 0 for more details.
Device parameters description
The username is admin by default.
The new password can be set from 8 characters to 32
characters and contains at least two types from capital letter,
small letter, number and special characters (excluding “'”, “"”,
“;”, “:” and “&”)
Follow the password security notice to set a high security level
password.
The new password should be in accordance with the confirm
password.
It is selected by default; the input mobile phone number will be used
for password retrieval and reset.
Click Initialize and the system begins to initialize device.
After initialization is completed, see 错误!未找到引用源。 for the interface displayed by
the system. If initialization succeeded, it will display ; if initialization failed, it will
display . Click the icon to check more details.
Click Complete, and then operation of device initialization is over.
After initialization is completed, the device status becomes initialized on the main
interface. The device information will be displayed on other interfaces.
4.1.2 Modifying IP Address
4.1.2.1 Single
Please refer to 5.4.3 Network for details of logging in WEB client and modifying IP address.
To Next Page
Loading...
Need help?
General
