Basic Configuration13
Click .
The Modify IP interface is displayed.
Click Search Setup.
The Setting dialog box is displayed. See Figure 4-4.
Setting
Set device segment, enter login username and password. Click OK.
The searched devices will be displayed after searching is completed.
As for the devices which need to be initialized, they can be used after initialization.
Click the corresponding of the device whose IP needs to be modified.
The Modify IP interface is displayed. See Figure 4-5.
Modify IP
Select the mode of setting IP address according to the actual situation.
DHCP (Dynamic Host Configuration Protocol) mode: When there is DHCP server
in the network, set Mode as DHCP, and then the device can automatically acquire
IP address from DHCP server.
To Next Page
Loading...
Need help?
General
