Basic Configuration14
Manual mode: Set Mode as Static, and fill in Target IP, Subnet Mask and
Gateway, and then the device can automatically acquire IP address from DHCP
server.
Click OK to complete modification.
4.1.2.2 Batch
Click .
The Modify IP interface is displayed.
Click Search Setup.
The Setting dialog box is displayed. See Figure 4-6.
Setting
Set device segment, enter username and password. Click OK.
The searched devices will be displayed after searching is completed.
As for the devices which need to be initialized, they can be used after initialization.
Select the device whose IP needs to be modified, click .
The Modify IP interface is displayed. See Figure 4-7.
To Next Page
Loading...
Need help?
General
